I am embarrassed to say that was it; works perfectly now.
Although, I am slightly confused:
There is an SPI flash chip as well as a NOR/NAND flash chip on this little
board? The SPI is used only for bootloading and pivoting and the NOR/SD/USB is
used for the rootfs?
Thanks for your help.
-dave
--- In Petr Ledvina <> wrote:
>
> >
> > >> TS-SPIFLASHBOOT - built Jan 26 2007
> > >> Copyright (c) 2007, Technologic Systems
> >
>
> You have probably boot jumper installed, so you are booting to ts7440 spi
> flash, not onboard fastboot flash. The save command uses correct onboard
> memory. Just remove the jumper ...
>
> Petr
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|