|
OK, I finally broke down and bought the TS-9448. And I've finally got some useful information on the screen. I think one problem I'm having is that there's almost no documentation at all about the TS-7552 revB or the TS-9448, maybe I picked the wrong board to start with, but things don't look good. When I got the console running and here's what I've seen so far: >> TS-BOOTROM - built Jan 4 2010 15:26:01 >> Copyright (c) 2009, Technologic Systems >> Booting from microSD card... . . . Finished booting in 2.00 seconds Type 'tshelp' for help # tshelp usbload - Load USB kernel drivers setdiopin <pin> <1,0,Z> - set DIO header pin 1-44 getdiopin <pin> - get DIO input state setrelay <val> - turn on/off TS-752 relays according to 3-bit val setout <val> - set 3-bit TS-752 output val getin - return 8 bit TS-752 inputs gettemp - return TS-752 temperature sensor in Celsius save - save initrd back to boot device (SD or SPI flash) sbctest - run TS production tests exit - boot SD card (if present) or filesystem mounted at /mnt/root # gettemp 0.0 # sbctest TS-752 TEST: ------------------------------- Current temp. 0.0 (20 -- 45 is OK) Relay vs IN 1-3 FAIL OUT vs IN 4-8 FAIL ------------------------------ I have to assume this is a bad thing. How should I proceed from here? Is this board hosed? Help!?!?! (*Chris*) On Sun, Apr 4, 2010 at 12:37 PM, Joel Morgan <> wrote:
|