| To: | |
|---|---|
| Subject: | [ts-7000] Debian on TS-7550 |
| From: | "Achim" <> |
| Date: | Tue, 13 Apr 2010 15:23:35 -0000 |
Hi all,
we try to use a TS-7550 for running Debian, but fail on starting Linux.
According the "TS-7500 Software guide" I need to boot into busybox and then
type "exit", but than the whole telnet session closes.
I also have no option to place/remove any jumper due to absence of a TS-752
board. So we have a plain TS-7550 board with no slot for any SD-card, no TS-752
baseboard but plenty of 256MB NAND Flash.
I hope there is a Debian already installed, but what do I need to do to boot
Debian?
Thanks
Achim
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] COM3 is not working, Milind Pande |
|---|---|
| Next by Date: | [ts-7000] Re: COM3 is not working, bsmuck2000 |
| Previous by Thread: | [ts-7000] COM3 is not working, Milind Pande |
| Next by Thread: | Re: [ts-7000] Debian on TS-7550, Neil Stone |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU