ts-7000
[Top] [All Lists]

[ts-7000] Re: Booting a TS-7260 straight to SD card

To:
Subject: [ts-7000] Re: Booting a TS-7260 straight to SD card
From: "michael.cogill" <>
Date: Sun, 11 Apr 2010 19:20:30 -0000

Hi All,
I am a noob with Linux and SBC. It does not work for me. I have tried 
everything i can think of and everything on these forums. All I get is the 
flash booting and busybox 1.0. The boot sequence shows that the boot sees the 
SDcard but I don't know of a Linux command that allows me to access it. I have 
even tried to make a fresh card according to the instructions on technologics 
site.
I'd appreciate any suggestions. Thanks
Michael

--- In  "Tom" <> wrote:
>
> 
> 
> Yep, that works.  Here's a question that I've been meaning to ask 
> embeddedarm, but maybe someone here knows.
> 
> To make this work, you have to one-time change the boot flash in the ts-7260 
> with:
>    tsbootrom-update
> 
> The documentation says "difficult to reverse"
> 
> The Question(s):
>   a) Does anyone know a URL that tells how to reverse it?
>         Failing that, does anyone know how to manually reverse it?
>         Failing that, does anyone know what it does?
> 
>   b) once tsbootrom-update has run, can I get back to RedBoot?
> 
> 
> 
> thx
> tc
> 
> 
> 
> --- In  Jeff O'Brien <jeff@> wrote:
> >
> > After you type exit and boot up, there should be a file called tsfastboot at
> > the root of the sd. Rename to something like tsfastboot.save and then
> > reboot. This should bypass the fastboot. To get it back, just rename the
> > file again and reboot.
> > jeff
> > 
> > 
> > 
> > 
> > >  
> > >  
> > >  
> > >    
> > > 
> > > Guys, I have a TS-7260.  Out of the box it boots up to TS-Linux on the
> > > on-board Flash.  I followed the steps at
> > > 
> > > http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
> > > 
> > > to try to configure the board to bypass TS-Linux and boot straight to the 
> > > SD
> > > card.  It didn't seem to have any effect, my board still boots to 
> > > TS-Linux and
> > > I have to type exit to get it to boot to SD.
> > > 
> > > Can anyone think of how to get this working properly.
> > > 
> > > Thanks so much,
> > > Fred
> > > 
> > >  
> > >    
> > > 
> > >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU