[ts-7000] Use USBLib In BusyBox

To:
Subject:	[ts-7000] Use USBLib In BusyBox
From:	"Dave" <>
Date:	Wed, 31 Mar 2010 20:58:54 -0000

I installed USBLib 1.00-6 on the standard Debian on TS-7800.  However, it uses 
a shared library that Busybox does not see.  I have not been able to resolve 
this issue.  Has any one resolved this issue - Using USBLib under BusyBox)?

Thanks
Dave



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Use USBLib In BusyBox, Dave <=

Previous by Date:	[ts-7000] Modprobe, ttyS, boot, Steve Weigold
Next by Date:	[ts-7000] Re: Modprobe, ttyS, boot (solved), kf8ki
Previous by Thread:	[ts-7000] Modprobe, ttyS, boot, Steve Weigold
Next by Thread:	[ts-7000] Improving mdev and /dev population performance?, Blair
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU