Nope, same behavior with the nohup.
--- In "Harold" <> wrote:
>
> I do not use the busybox environment, so this is just a guess, but maybe your
> programs are being terminated by SIGHUP. Try starting them with nohup.
>
> --- In "pattykirsch" <kirsch@> wrote:
> >
> > I'd like to run my programs in the busybox environment on startup. I've
> > seen several references to just editing the linuxrc file, but I can't get
> > it working.... I've got them in /home/eclipse on the full image, and I can
> > run them from the busybox command line. I've put the command into the
> > linuxrc file, but they don't start. No error messages either.
> >
> > The commands are of the form
> > /mnt/root/home/eclipse/executable &
> > these work on the command line once it shows up. I've tried putting them
> > between the network setup block, and the shinit block, and also inside the
> > shinit block. I can get echos to output both before and after the commands
> > to start.
> >
> > Any advice?
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|