I do not use the busybox environment, so this is just a guess, but maybe your
programs are being terminated by SIGHUP. Try starting them with nohup.
--- In "pattykirsch" <> wrote:
>
> I'd like to run my programs in the busybox environment on startup. I've seen
> several references to just editing the linuxrc file, but I can't get it
> working.... I've got them in /home/eclipse on the full image, and I can run
> them from the busybox command line. I've put the command into the linuxrc
> file, but they don't start. No error messages either.
>
> The commands are of the form
> /mnt/root/home/eclipse/executable &
> these work on the command line once it shows up. I've tried putting them
> between the network setup block, and the shinit block, and also inside the
> shinit block. I can get echos to output both before and after the commands
> to start.
>
> Any advice?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|