depending on what the previous filesystem / kernel was ... it could
potentially be incompatibilities between the 2.4 kernel's yaffs and
the 2.6 kernel's yaffs ... the latter usually would not recognize the
former's at all and it would only see an unformatted yaffs partition.
The alternative way to get a working filesystem on your ts7260 in this
case would be to boot from nfs, create a yaffs image, and then write
the yaffs image to mtblock1 (or whatever it is).
dmesg output would be helpful if you need further assistance.
On Tue, Feb 16, 2010 at 11:32 PM, lucas azevedo <> wrote:
>
>
>
> I've compiled the 2.6.32 kernel using matt's patch, but unfortunatelly the
> system hangs when trying to boot this new kernel..
> Anyone knows what might be happening?
>
> 2010/2/10 lucas azevedo <>
>>
>> 2010/2/10 Satish Chetty <>
>>>
>>> Hello,
>>
>> Hello Satish,
>>
>>>
>>> Has anybody used web cam with TS 7260's 2.4 kernel? Any
>>> recommendations
>>> on the hardware?
>>
>> I'm in a similar situation. I've been trying to use a webcam with the TS7250
>> board with 2.4 kernel, but untill now no success. It seems that the drivers
>> I need (gspca_main and gspca_pac207) are available on kernels newer than
>> 2.6.28. My next try is to use Matt's kernel patch to compile the 2.6.28
>> kernel using the arm-none-linux-gnueabi toolchain. I will inform you as soon
>> as I have results.
>>
>>>
>>> Thanks,
>>> -Satish.
>>
>> Best Regards,
>> Lucas Azevedo
>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>
>
>
> --
> Atenciosamente,
> Lucas Paulino Azevedo.
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|