This is the RedBoot setting that I tried,
RedBoot> fconfig
Run script at boot: true
Enter script, terminate with empty line
>> load -r -b 0x00218000 -m disk hda1:/vmlinux9.bin
>> exec -c "console=ttyAM0,115200 root=/dev/hda1"
>>
Boot script timeout (1000ms resolution): 1
Use BOOTP for network configuration: true
DNS server IP address:
GDB connection port: 8080
Force console for special debug messages: true
Console number for special debug messages: 3
Network debug at boot time: true
Update RedBoot non-volatile configuration - continue (y/n)? y
and this is the current output that I get when I start,
>> TS-BOOTROM, Rev 1.09 - built 09:54:04, Oct 23 2008
>> Copyright (C) 2006-2008, Technologic Systems
>> TS-7200: Rev >E1 CPU, Rev C PLD, 32MB SDRAM, options ( MAX197-ADC RS485 )
+$T050f:60010000;0d:9ca60300;#4a
when I press any key, it repeats the error (+$T050f:60010000;0d:9ca60300;#4a)
any idea?
--- In "Fahad C" <> wrote:
>
> I am still stuck,
>
> I would like clarify that I have already turned off Hardware control of
> hyperterminal and my interupt wait time was also 1 second. According to old
> posts, most people got this problem due to these two reasons.
>
> but for me, it is different.
>
> any solution?
>
>
>
> --- In "Fahad C" <fahadislam2002@> wrote:
> >
> > I thing, I did wrong try here.
> > Force console for special debug messages: false
> >
> > So how to overcome this. As it was an option so obviously so obviously it
> > was logical to test it. Also not explained in Documents.
> >
> > any idea?
> >
> >
> >
> > --- In "Fahad C" <fahadislam2002@> wrote:
> > >
> > > Hi all,
> > > While trying to connect LAN, I gave some wrong setting to RedBoot and
> > > now it is not allowing me to interupt (Ctrl-c) and change setting. Every
> > > time I start my board, it gives following error
> > >
> > > $T050f:74010000;0d:9ca60300;#4f
> > >
> > > I enable error messages for network to 3 and I thing it is giving error
> > > numbers. I am unable to understand that and cannot change as it donot
> > > allow to interrupt.
> > >
> > > any solution?
> > >
> > >
> > >
> > > .Fahad
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|