Re: [ts-7000] automatic boot from SD for TS7500

To:	"" <>
Subject:	Re: [ts-7000] automatic boot from SD for TS7500
From:	"J. Stack" <>
Date:	Wed, 17 Feb 2010 20:08:56 -0800 (PST)

On TS-7500, short Mode 1 pin to ground thru a 750 ohm resistor. See chart on schematic. This will allow booting from SD card.

Joe.

Sent from my iPhone

On Feb 17, 2010, at 7:21 PM, "Jongsoo Kim" <> wrote:

Group

So far, I have been using âExitâ command to boot linux from SD.

How can I make TS7500 automatically boot from SD?

I appreciate any help

Thanks

Jongsoo

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [ts-7000] automatic boot from SD for TS7500, J. Stack <=

Previous by Date:	Re: [ts-7000] extract lenny image to an empty SD card 7500, Dan Weese
Next by Date:	Re: [ts-7000] extract lenny image to an empty SD card 7500, Neil Stone
Previous by Thread:	RE: [ts-7000] extract lenny image to an empty SD card 7500, Neil Stone
Next by Thread:	[ts-7000] kernel 2.6.32.3 won't boot, dpstorey
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU