Hello,
Check /linuxrc file. The file system should have been mounted as -ro by
default You can change it to -rw. Also, your clock will reset every time
you reboot. So you need to set your clock from the hwclock. Those
utilities should be available on /sbin or you can check
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-utils/
Cheers,
-Satish.
tsao.terence wrote:
>
>
> Dear Linux Masters:
>
> I just successfully boot up Debian from a SD card by following the
> instruction online
> http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
> <http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php>
>
> I am now having Debian but some how the entire FILE SYSTEM IS READ ONLY!
> I tried to modify /dev/network/interface so I can configure network, but
> no luck because the all the files are read only.
>
> What can I do to fix this?
>
> Thanks!
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|