[ts-7000] Re: TS7260 boot up from SD, FILE SYTEM READ ONLY

["PeterElliot" <>]

Hi,

Have you tried typing EXIT at the prompt. By default the system boots up in 
fastboot mode, to enter the fill Debian OS you need to exit the fastboot 
environment and load the Debian system.

Regards,

PJE

--- In  "tsao.terence" <> wrote:
>
> Dear Linux Masters:
> 
>      I just successfully boot up Debian from a SD card by following the 
> instruction online
> http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
> 
> I am now having Debian but some how the entire FILE SYSTEM IS READ ONLY! I 
> tried to modify /dev/network/interface so I can configure network, but no 
> luck because the all the files are read only.
> 
> What can I do to fix this?
> 
> Thanks!
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/