[ts-7000] TS7260 UART: set baudrate up to 1Mbps

["tsao.terence" <>]

Hi,

   I have a 2.4Ghz radio card that supports up to 1Mbps transfer rate with uart 
interface.  Therefore I am trying to hack the TS7260 uart to have the baudrate 
of 1000000.  The only reason they quote maximum baudrate is only 230K is 
because the limitation of the RS232 chip on board.

Therefore I will like to bypass the RS232 level, but I don't know if you can 
actually do that.  

1.)  Can I set the uart to a different set of pins therefore it doesn't go 
though the RS232 chip and it won't have baud rate limitation issue?

2.)  Get a USB to serial converter, but I don't really like that idea, I want 
to use just the board itself.

3.)  What else can I do to upscale the baudrate to 1000000 without having to 
distort the signal.

Remember I want UART not RS232

Thanks



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/