Thank you.
I am planning to use SDCard, so I guess glibc will do it. I'll try with my
successfully build.
Enrique
--- In "janne.kario" <> wrote:
>
>
>
> --- In "akikem" <akikem@> wrote:
> >
> >
> > On the other hand. I have a question. I compiled first angstrom for my
> > machine using glibc. I didn't have trouble with that. When should I use
> > glibc or uclibc? I mean, the restriction is given by the machine? Or by my
> > application?
>
> The restriction comes from the amount of space you have available for the
> distribution. You might need to use uclibc if you need to make your
> distribution fit in the smaller range (4/8/16/32/64Mb) of flash memories. I
> don't know whether you can compile rootfs small enough for the 4Mb NOR Flash
> that TS-7500 has using glibc. Check the resulting size of the glibc rootfs
> that you've succesfully built.
>
> If you don't have rootfs size restictions (you're using USB thumb drive or SD
> card) then I'd suggest going with glibc.
>
> j
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|