[ts-7000] ADC Bipolar channel

To:
Subject:	[ts-7000] ADC Bipolar channel
From:	"link_in_the_city" <>
Date:	Fri, 11 Dec 2009 22:03:21 -0000

Hi there, i'm trying to use the ADC embebbed into EP9302 to catch a bipolar 
signal (+/- 15V). Is it posible with this ADC or i have to use the optional 
ADC? Is there an electric schematic recommended by ARM?

Thanks for help



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ADC Bipolar channel, link_in_the_city <= [ts-7000] Re: ADC Bipolar channel, naturalwatt

Previous by Date:	[ts-7000] Re: Have someone run redboot+kernel 2.6 + root filesystem in a SD card for a TS7260?, Gonzalo
Next by Date:	[ts-7000] Re: ADC on 7260, Blair
Previous by Thread:	[ts-7000] FPGA, Dinesh
Next by Thread:	[ts-7000] Re: ADC Bipolar channel, naturalwatt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU