[ts-7000] FPGA

To:
Subject:	[ts-7000] FPGA
From:	"Dinesh" <>
Date:	Fri, 11 Dec 2009 11:01:39 -0000

Hi,
   I am using TS-7300 board and written a verilog code on altera quartus II on 
Distro having Ubuntu .But on Board card how can I use Altera tool because board 
RAM is 32MB.Can somebody help me how can  generate .rbf file on board card????



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] FPGA, Dinesh <= Re: [ts-7000] FPGA, David Hawkins

Previous by Date:	[ts-7000] ADC on 7260, Satish Chetty
Next by Date:	Re: [ts-7000] FPGA, David Hawkins
Previous by Thread:	[ts-7000] New to TS-7xxx ARM SBC, looking for basic RS232 loopback test program. (TS-7500, Jon L
Next by Thread:	Re: [ts-7000] FPGA, David Hawkins
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU