[ts-7000] ADC on 7260

[Satish Chetty <>]

Hello,
        I ran the ADC program provided by TS on the 7260 and I get the 
following values even when nothing is connected to the pins. Is that 
normal? Any calibration to be done?

Thanks,
-Satish.
---
$ ./adc_7250
Calibration Values =
[ 0xffff 0xffff 0xff 0x0 0xf300 0x9940 0x9d 0xff00 0xffff 0xffff  ]
Board has been calibrated by Technologic Systems...
Channel 0: -1.274V
Channel 1: -205.301V
Channel 2: 1.631V
Channel 3: 1.311V
Channel 4: 0.604V


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/