[ts-7000] Hooking a Microphone up to the ADC and using the example code.

["imthemoonman" <>]

Is it possible to hook the microphone up to the ADC on my TS-7250 and then us 
the ADC example code to get some results?  I'm planning on sending my heart 
beat into the microphone and then calculate a heart rate.  Here's what I'm 
thinking:
1. Hook the microphone lead line to ADC channel 0 and the group line to ground 
on the ADC.  I might have to add some resistors to make the voltage correct?
2. Run the example code to see if I get any results.  It should work?
3. Change the code for what I need.

Any suggestions/reassurance is greatly appreciated.




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/