[ts-7000] RS485 support option (TS-7200)

["mathlaj" <>]

Is the RS-485 support option on the TS-7200 only depends on an added chip 
(SP4082EE 0823L B55614)?

I have two TS-7200, one with RS4-85 option, the other without.  The problem is 
the one with RS-485 option has been damaged.  The only physical difference I 
noticed on the board is the chip I mentionned above.

So my question is simple, if I remove this chip from the one with RS485 option 
and solder it on the other (without RS-485 option when ordered), will it works 
or there is other drivers/modification I would have to do?

Thanks.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/