ts-7000
[Top] [All Lists]

[ts-7000] Re: update ts-kernel?¿

To:
Subject: [ts-7000] Re: update ts-kernel?¿
From: "ortlego" <>
Date: Thu, 05 Nov 2009 01:20:58 -0000
Hi, i am facing a problem, i do exactly like you said Santiago, but, when the 
System set-up i make a telnet connection  to  add the modules and appear: 


:/home/eltom# telnet 192.168.0.50
Trying 192.168.0.50...
Connected to 192.168.0.50.
Escape character is '^]'.

Debian GNU/Linux 3.1 (none)
Finished booting in 1.44 seconds
Type 'tshelp' for help
$ ls               
onboardflash   serialsh.pid   tmp            mnt            etc
ts7xxx.subr    serial-shinit  sbin           usr            dev
linuxrc        vid-shinit     ts7300fb.o     stage2         bin
root           vidsh.pid      sdcard.o       shinit         lost+found
home           lib            proc           fbgen.o
splash.gz      opt            var            fbcon-cfb16.o
$ su
:/# tar zxvfp /mnt/root/
bin         home        lost+found  proc        tmp         var
boot        include     mnt         root        tsfastboot  
dev         initrd      nfsroot     sbin        tsinit      
etc         lib         opt         sys         usr         
 
:/# tar zxvfp /tmp/tskernelmodules-2.4.26-ts11-7400.tar.gz -C 
/lib/modules/
2.4.26-ts11/
2.4.26-ts11/modules.usbmap
tar: 2.4.26-ts11/modules.usbmap: Cannot open: File exists
2.4.26-ts11/modules.generic_string
tar: 2.4.26-ts11/modules.generic_string: Cannot open: File exists
2.4.26-ts11/modules.parportmap
tar: 2.4.26-ts11/modules.parportmap: Cannot open: File exists
2.4.26-ts11/modules.pnpbiosmap
tar: 2.4.26-ts11/modules.pnpbiosmap: Cannot open: File exists
2.4.26-ts11/kernel/
2.4.26-ts11/kernel/fs/
2.4.26-ts11/kernel/fs/fat/
2.4.26-ts11/kernel/fs/fat/fat.o
tar: 2.4.26-ts11/kernel/fs/fat/fat.o: Cannot open: File exists
2.4.26-ts11/kernel/fs/nls/
tar: 2.4.26-ts11/kernel/fs/fat: Cannot utime: Read-only file system
      .
      .
      .
      .
tar: 2.4.26-ts11/modules.pcimap: Cannot open: File exists
tar: 2.4.26-ts11: Cannot utime: Read-only file system
tar: 2.4.26-ts11: Cannot change mode to rwxr-xr-x: Read-only file system
tar: 2.4.26-ts11: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: Error exit delayed from previous errors
:/# 


So i think than i am seeing the sd card but the file system is not loading. 

thanks,  



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU