[ts-7000] Corrupted flas recovery

[Daniel Smolik <>]

Hi all,
I have problem with recovering completely  erased flash on TS-7200. I by 
mistake erased whole flash on TS-7200 with
flash_eraseall. I have boot to TS-9420 and see /dev/mtd1 - /dev/mtd6. I flashcp 
/dev/mtd3 tsbootrom.bin. After this 
board start booting on serial console is displayed  information about 
TS-BOOTROM but after this "Could not find CRUS 
signature" is displayed. It's much better than on start. After this I try flash 
redboot with flashcp. But I get "no such 
device". In /proc/mtd I see /dev/mtd4 and mtd5  but I can't use it. Have 
anybody experience with TS-9420 ?

                Regards
                        Dan





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/