[ts-7000] TS7800 - PPP wvdial

["Reti Istvan" <>]

Hello,
  I am trying to connect the TS-7800 board with a GPRS modem using 
wvdial.But I am getting always the same error.

:root# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.
ttyS0<*1>: failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too attyS1<*1>: ATQ0 V1 E1 -- failed 
with 2400 baud, next try: 9600 baud

ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3 S4 S5 S6 S7


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

I modified /etc/inittab but there's no difference.
I tried to set up a simple ppp connection between my ubuntu dev comp 
and the board but none of them connects. If I remove hardware flow 
control from my commands  when I start the ppp command on the board the  
connection on the dev machine is closed immediately.

Thanks,
  Istvan




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/