[ts-7000] Problem loading modules by modprobe for peripherals on ts7800

["smart_ssi" <>]

Hi,

I want to stack two peripherals on my TS7800 board, one is TSGSM1 and other is 
redicom's phone line modem. I have used these boards separately by loading the 
ts7800_isa16550 module...
command i used:
modprobe ts7800_isa16550 io=0x3f8 irq=7

but when i stack two peripherals together i have to load separate modules for 
both.
1.How can I load separate modules with same name
2.What should be the values for io and irq

Regards,
Siddique Ilahi



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/