[ts-7000] Re: How update firmware in ts-7300

["taha86d" <>]

Tanks PJE

I download sdimage.dd.bz2 from ts-7300 ftp site and run:
        
        bunzip2 sdimage.dd.bz2 
        dd if=sdimage.dd of=/dev/mmcblk0

My SD card is 512MB but sdimage.dd is for 256MB.
I insert SD card and power on board, but not boot.red LED blinking  twice.
I think that integrity error is in system, because I run 'sdlock' and 
'tsbootrom_update' incorrectly.
This problem can solve by overwriting firmware of board in EEPROM, but I don't 
know how do it.
is it boot from LAN or USB or COM1? How? 
        




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/