wrote:
> Hi,
> just a general question about ethernet-packet capture.
> what I',m trying to get working is an application to receive packets on eth0
> on the TS-7260 board and route them to either eth1 or eth2 on a TS-eth2
> peripheral card.
Are you wanting to just route packets, or actually look at them and or
modify them? If all you want to do is route then any basic Linux
routing tutorial should have your answers, try starting with reading up
on iptables and iproute2. If that's not the case and you need to write
a app to do something to these packets then rebroadcast them again
you'll want to read up on socket programming, depending on your language
of choice.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|