ts-7000
[Top] [All Lists]

[ts-7000] Re: Kernel config required settings for TS SBCs?

To:
Subject: [ts-7000] Re: Kernel config required settings for TS SBCs?
From: "odonovan_dan" <>
Date: Tue, 29 Sep 2009 15:43:21 -0000
--- In  "odonovan_dan" <> wrote:
>
> --- In  "Blair" <bburtan65@> wrote:
> >
> > Probably a FAQ but I'll throw it out there anyway.
> > So far I've been working reasonably well on Linux 2.4 on a 7260 board.  Now 
> > I'm finding a few needs for stuff that's in 2.6 e.g. audio, inotify, higher 
> > timer resolutions etc.  I'd like to take a stab at building a kernel from 
> > scratch and I downloaded what appears to be a 2.6.29 kernel tarball from 
> > the 7260 subdirectory on the TS website.  But I've never built a kernel 
> > before let alone one that is tailored to the SBC.  I fired up menuconfig 
> > and there are more options than a Chinese restaurant menu (or perhaps a 
> > really great NY deli).  So, does anyone have a config file or list of 
> > options that are required to build a kernel for TS boards?  Perhaps a list 
> > of stuff you should never attempt to use would be good too.
> >
> 
> 
> To get started with a basic config that works on the SBC, you could take a 
> look in the arch/arm/configs subdirectory to see if there's already a config 
> defined for your target device.  To apply your chosen config 
> (ts7400_defconfig, for my example), type something like:
> 
> # make ts7400_defconfig
> (This assumes your cross-compilation environment is already set up correctly, 
> by the way)
> 
> Then you should be able to add extra options using 
> # make menuconfig
>

In case it helps, here's a link to the source tarball that I used:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/sources/tskernel-2.6.29-ts-src.tar.gz

And here's a link to the cross-toolchain that I used to compile it:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/cross-toolchains/crosstool-linux26-3.4.4-2005q3-2.tar.gz




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU