That was a good idea, but I get the exact same error.
Note that on "etch" the modeline was 800x600, eventhough the screen is 800x480.
--- In "bsmuck2000" <> wrote:
>
> Have you tried 800x480?
>
>
> --- In "tachion0niohcat" <gnodev@> wrote:
> >
> > Hello TS-folks,
> >
> > I am trying to get my TS7390 board with LCD to boot a debian-lenny-eabi
> > distribution. So far most things are working, but I cannot seem to get the
> > X windows to start.
> >
> > When I run Xorg, all is well until the mode change, where
> > /var/log/Xorg.0.log tells me that:
> >
> > (**) FBDEV(0): Using gamma correction (0.3, 0.3, 0.3)
> > (II) FBDEV(0): hardware: TS7370 (video memory: 750kB)
> > (II) FBDEV(0): checking modes against framebuffer device...
> > (II) FBDEV(0): mode "800x600" test failed
> > (II) FBDEV(0): checking modes against monitor...
> >
> > and then later that init screen failed:
> >
> > Fatal server error:
> > AddScreen/ScreenInit failed for driver 0
> >
> > Yet, I check the kernel driver for the frame buffer device, and it
> > explicitly states that "800x600" is supported (the only other mode is
> > "640x480" which I also don't get to work.)
> >
> > The /etc/X11/config.org that I use is identical to the one that works on
> > debian "Etch", which is oabi.
> >
> > Does anyone have this one figured out?
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|