Have you tried 800x480?
--- In "tachion0niohcat" <> wrote:
>
> Hello TS-folks,
>
> I am trying to get my TS7390 board with LCD to boot a debian-lenny-eabi
> distribution. So far most things are working, but I cannot seem to get the X
> windows to start.
>
> When I run Xorg, all is well until the mode change, where /var/log/Xorg.0.log
> tells me that:
>
> (**) FBDEV(0): Using gamma correction (0.3, 0.3, 0.3)
> (II) FBDEV(0): hardware: TS7370 (video memory: 750kB)
> (II) FBDEV(0): checking modes against framebuffer device...
> (II) FBDEV(0): mode "800x600" test failed
> (II) FBDEV(0): checking modes against monitor...
>
> and then later that init screen failed:
>
> Fatal server error:
> AddScreen/ScreenInit failed for driver 0
>
> Yet, I check the kernel driver for the frame buffer device, and it explicitly
> states that "800x600" is supported (the only other mode is "640x480" which I
> also don't get to work.)
>
> The /etc/X11/config.org that I use is identical to the one that works on
> debian "Etch", which is oabi.
>
> Does anyone have this one figured out?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|