[ts-7000] Re: Control The I/O of TS-7300

["amit" <>]

Please suggest me something.
Waiting for some Response...
--- In  "ts7300" <> wrote:
>
> Can somebody assist me upon this.
> By default 3V is coming at DIO1 pin4.what data register value I supposed to 
> set to toggle the o/p 3.3v and 0v.
> Will it be PCDR:0xFE for 0v??
>            PCDR:0X01 FOR 1V.??
> --- In  "ts7300" <ts7300@> wrote:
> >
> > Have doubt in manual mention make bit0 as output for portC.For LED ON
> >  *PCDR &= 0xFF; and For LED OFF  *PCDR &= 0x00; These data value I have to 
> > Give. 
> > --- In  "ts7300" <ts7300@> wrote:
> > >
> > > I am using TS-7300 and want to control the I/0 of board via connecting 
> > > LED to I/O Board.And using DIO1 PIN4 of board.
> > > Below are the C code:
> > > #include<unistd.h>
> > > #include<sys/types.h>
> > > #include<sys/mman.h>
> > > #include<stdio.h>
> > > #include<fcntl.h>
> > > #include<string.h>
> > > 
> > > int main(int argc, char **argv)
> > > {
> > >    unsigned char *start;
> > >    volatile unsigned int *PCDR, *PCDDR;
> > >    int fd = open("/dev/mem", O_RDWR);
> > > 
> > > 
> > >    start = mmap(0, getpagesize(), PROT_READ|PROT_WRITE, MAP_SHARED, fd, 
> > > 0x80840000);
> > >    PCDR = (unsigned int *)(start + 0x08);     // port c data register
> > >    PCDDR = (unsigned int *)(start + 0x18);    // port c direction register
> > > 
> > >    *PCDDR = 0x01; // Make bit 0 an output Port C bit 0 is connected to 
> > > the LED
> > > 
> > >    *PCDR &= 0xFE; // Turn the LED on
> > >    sleep(30);  // Output on for 30 seconds
> > >    *PCDR |= 0x01; // Turn the LED  off
> > > 
> > >    close(fd);
> > >    return 0;
> > > }
> > > And Problem is that after 30 seconds its no becoming low(LED off).Keep on 
> > > giving +3V on PIN4 of Board.
> > > Will anybody have an idea about that???
> > >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/