[ts-7000] Placing JTAG on TS-7250

To:
Subject:	[ts-7000] Placing JTAG on TS-7250
From:	"pietvandervelden" <>
Date:	Wed, 16 Sep 2009 09:46:59 -0000

Hello,

I'm currently soldering a JTAG header for the EP9302 on a TS-7250 board. 

I want to connect the PRSTn of the EP9302 (not to be confused with nTRST) to 
the JTAG header as well, but is this possible since this line is controlled by 
the CPLD? Can it safely be pulled down by the JTAG controller?

Thanks in advance!



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Placing JTAG on TS-7250, pietvandervelden <=

Previous by Date:	[ts-7000] OpenBoat - working with a TS 7260, Peter Harrison
Next by Date:	[ts-7000] tkusb.o: eGalax touch screen USB kernel module for 7300 and 2.4.26-ts11, mfmikula
Previous by Thread:	[ts-7000] OpenBoat - working with a TS 7260, Peter Harrison
Next by Thread:	[ts-7000] tkusb.o: eGalax touch screen USB kernel module for 7300 and 2.4.26-ts11, mfmikula
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU