[ts-7000] Use 7800 dio to Reset modem pin

["eric.robishaw" <>]

I have a Multitech GPRS modem that has a reset pin (14) that according to the 
modem documentation:"To reset, connect to GND momentarily (typical:2mSec). Open 
for normal operation."

I have this pin wired to DIO pin 4 on the TS7800 board.

Can someone direct me on the steps to take / code to implement to accomplish a 
reset?

Am I correct that I need to set bit 4 at address 0xe8000004 to 0 for 2mSec and 
then back to 1 ?








------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/