Oops, I think the TS7400 I'm using doesn't have an RTC.
After a long time, it eventually booted up and I disabled the 'hwclock'
init scripts, since it was 'hwclock' that was hanging.
Please disregard my question below.
Thanks,
-Dan
--- In "odonovan_dan" <> wrote:
>
> Hi Matt
>
> Would you mind telling me what changes you made to the rc scripts
> loading hwclock modules, as you mentioned below?
>
> I've tried to boot my 7400 from SD card, using the
> 512mbsd-7400-linux2629-lenny-eabi.dd.bz2 image (following recent
> instructions from Petr), and it hangs early in the boot sequence.
This
> is what my console shows:
>
> >> TS-SDBOOT - built Jan 26 2007
> >> Copyright (c) 2007, Technologic Systems
> .
> .
> .
> Uncompressing
> Linux.............................................................
> >> Booting to SD Card...
> INIT: version 2.86 booting
> Setting the system clock.
>
>
> (and that's it, it just hangs at that point)
> I'm wondering if it's perhaps related to what you saw?
>
> Many thanks,
> -Dan
>
>
>
> --- In "matt.minuti" minuti@ wrote:
> >
> > Hi there!
> >
> > After following some ts7300 instructions I found on this mailing
list,
> I managed to write this image to and SD card and expand the root
> partition to about 1.5gb.
>
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/51\
\
> 2mbsd-7400-linux26-lenny-eabi.dd.bz2
> >
> > The system almost worked, I had to fix the rc scripts loading
hwclock
> modules because for some strange reason the defaults weren't working.
> >
> > All that's set now, and the system seems to run reliably. I set a
root
> password, and can log in and out fine. However, attempting a login via
> SSH triggers an immediate password expiration and boots me out of the
> SSH connection. Via serial, on next login, I need to reset my
password.
> >
> > How can I make my password persistent? It doesn't seem to hold no
> matter what I do, and SSH is very necessary for my application.
> >
> > Thanks,
> > ~Matt
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|