|
Hi Matt Would you mind telling me what changes you made to the rc scripts loading hwclock modules, as you mentioned below? I've tried to boot my 7400 from SD card, using the 512mbsd-7400-linux2629-lenny-eabi.dd.bz2 image (following recent instructions from Petr), and it hangs early in the boot sequence. This is what my console shows: >> TS-SDBOOT - built Jan 26 2007 >> Copyright (c) 2007, Technologic Systems .& nbsp; . . & nbsp; Uncompressing Linux............................................................. >> Booting to SD Card... INIT: version 2.86 booting & nbsp; Setting the system clock. (and that's it, it just hangs at that point) I'm wondering if it's perhaps related to what you saw? Many thanks, -Dan --- In "matt.minuti" <> wrote: > > Hi there! > > After following some ts7300 instructions I found on this mailing list, I managed to write this image to and SD card and expand the root partition to about 1.5gb. ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2 > > The system almost worked, I had to fix the rc scripts loading hwclock modules because for some strange reason the defaults weren't working. > > All that's set now, and the system seems to run reliably. I set a root password, and can log in and out fine. However, attempting a login via SSH triggers an immediate password expiration and boots me out of the SSH connection. Via serial, on next login, I need to reset my password. > > How can I make my password persistent? It doesn't seem to hold no matter what I do, and SSH is very necessary for my application. > > Thanks, > ~Matt > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |