2009/9/8 al l <>:
>
>
> Buenos días Gonzalo,
>
> estoy haciendo un desarrollo con la placa ts7800 y no puedo hacer uso del
> puerto serie com2. El SO que estoy usando es el Debian Lenny, por lo demás
> no he tocado nada de la distribución ni de la placa. Lo he dejado tal y como
> lo ofrece el fabricante. Sabes si hay que hacer algo para que el com2 me
> funcione en mis programas, o debería de funcionar desde el principio???
> Necesito saberlo para ver si es fallo de fabricación....
>
> gracias
Be careful, you posted to the mailing list... which wouldn't be much
of a problem if it weren't in spanish!
Anyway, I'll reply to your private e-mail.
Gonzalo
> ________________________________
> De: Gonzalo A. de la Vega <>
> Para:
> Enviado: martes, 8 de septiembre, 2009 3:13:38
> Asunto: Re: [ts-7000] GPIO pin defaults on startup?
>
>
>
> On Mon, Sep 7, 2009 at 2:05 PM, bburtan65< com> wrote:
>>
>>
>> On a 7260 in the time between when power is applied and a stable shell
>> prompt, what it the state of the GPIO pins? Do the default to ground or
>> are
>> the floating and undefined?
>
> They are all inputs for sure...most, if not all, have week pull-up. In
> any case, they all read as 1 when nothing is connected.
>
>>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|