[ts-7000] Com2 and Com3 on a TS7260

["tachion0niohcat" <>]

We have a TS7260 board, which has 3 com ports (COM1, COM2, COM3). We have 
successfully used the COM1 port for the console and it works great. We would 
like to talk with some scientific equipment over the other COM ports, however 
this has been unsuccessful.

>From the manual it is not clear wether the COM2 and COM3 are RS-232 or wether 
>these are RS-485 COM ports. It seems the latter, but I am not 100% sure.

Could someone confirm what type of serial ports these are?

Thank you much!



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/