Re: [ts-7000] Unable to know how to load built custom kernel in TS7300

[naresh raga <>]

Hi mike,
I have tried to perform below command on my SDcard 2GB in size (already having sdimage-new on it from TS.)
   dd if=vmlinux of=/dev/mmcblk0p1

The partition information of my SDcard:
Partition                               Size
/dev/mmcblk0p1                 1.48MB
/dev/mmcblk0p2                 1.00MB
unallocated                          2.25MB
/dev/mmcblk0p3                 1.83GB


The space in /dev/mmcblk0p1 is not enough for vmlinux(1.8MB) to fit in.So it encountered error saying No space left on the device.
So what should I do to load the kernel on to my SDcard.I have gone through many posts in TS7000 yahoo groups,but there is no direct answer in any post.Please help me out.

Thanks
Naresh.

 

---

 See the Web's breaking stories, chosen by people like you. Check out  Yahoo! Buzz.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___