[ts-7000] X11 setup Bus ID

ts-7000

[ts-7000] X11 setup Bus ID

To:
Subject:	[ts-7000] X11 setup Bus ID
From:	"Mike Lehmann" <>
Date:	Wed, 19 Aug 2009 00:35:16 -0000

I am trying to setup X11 on my 7300 and am wondering how I can find out the Bus 
ID of the video card.  Thanks.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] X11 setup Bus ID, Mike Lehmann <=

Previous by Date:	Re: [ts-7000] Re: yaffs tragedy: no more eraased blocks, Eddie Dawydiuk
Next by Date:	Re: [ts-7000] Re: Qt/Embedded - almost there!, Scott Zimmerman
Previous by Thread:	[ts-7000] RAM disk, tim
Next by Thread:	[ts-7000] Cross-compile EABI-MaverickCrunch GTK-DFB Aftermatch, Dunge2
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU