[ts-7000] problem Read Only for TS-7390

To:
Subject:	[ts-7000] problem Read Only for TS-7390
From:	"tonpi_487" <>
Date:	Tue, 18 Aug 2009 17:40:40 -0000

problem Read Only for TS-7390

there is a question as follows

1. What Terminal (Serial Console)
2. I have TS-9445 how to inquire  way out  read only



Thank you
Parinya.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] problem Read Only for TS-7390, tonpi_487 <=

Previous by Date:	Re: [ts-7000] Re: where's the source?, Breton M. Saunders
Next by Date:	Re: [ts-7000] Re: Qt/Embedded - almost there!, Scott Zimmerman
Previous by Thread:	[ts-7000] Board I/O, ts7300
Next by Thread:	[ts-7000] RAM disk, tim
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU