[ts-7000] X11 config file

To:
Subject:	[ts-7000] X11 config file
From:	"Mike Lehmann" <>
Date:	Tue, 18 Aug 2009 00:27:32 -0000

Does anyone have a config file for X11 that works on a 7300?  Also, if you 
could give me the procedure as to how you installed it, that would be great!  I 
have been trying to get X11 working on my 7300 for the longest time.
Thanks.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] X11 config file, Mike Lehmann <=

Previous by Date:	Re: [ts-7000] Re: where's the source?, Eddie Dawydiuk
Next by Date:	[ts-7000] Board I/O, ts7300
Previous by Thread:	[ts-7000] eabi cross compile missing sin/cos?, Scott Zimmerman
Next by Thread:	[ts-7000] Board I/O, ts7300
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU