In which file did you make the change EXTRAVERSION = ts11-rt ??
--- In "matej.spindler" <> wrote:
>
> Look at the Makefile.rej!
>
> This part of the patch also faild for me. It's because the patch was
> not made for the ts11 kernel.
>
> You can change the extra version to something like EXTRAVERSION =
> ts11-rt.
>
> After that compile the kernel an than RTAI. If I remember right I
> didn't have any more problems.
>
> --- In "Dan" <jiggersplat@> wrote:
> >
> > you're right about the kernel source. i had already realized that was
> > not the case after i posted and tried the same procedure after
> > applying the adeos patch. unforutunely, i don't seem to be able to
> > apply the adeos patch correctly.
> >
> >
> > Hunk # FAILED at 1.
> > 1 out of 4 hunks FAILED -- saving rejects to file Makefile.rej
> >
> >
> >
> >
> > --- In "Steve Janisch" <sjanisch@> wrote:
> > >
> > > I don't think TS has the actual source code for ts11-rt on the ftp
> > > site (I could be wrong... things change from time to time -- but at
> > > least I did not find it up there).
> > >
> > > What you might have downloaded was the ts11 base source.
> > >
> > > Then you must apply the rtai patch to the ts11 code.
> > >
> > > The ts11 source is at
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-
> > > 2.4.26-ts11-src.tar.gz
> > >
> > > The rtai patch is at
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/rt-
> > > tskernel-2.4.26-tsX-adeos.patch
> > >
> > > After the patch you compile the kernel...
> > >
> > > Then when you go to rtai it should find all the right places.
> > >
> > > The rtai message you received seems to note that the rtai patch
> > > wasn't applied, so perhaps you are mistaken about downloading pre-
> > > patched source code.
> > >
> > > I saw your other e-mail about the output of the test programs... I
> > > will try and run something and post my outputs.
> > >
> > >
> > >
> > > --- In "Dan" <jiggersplat@> wrote:
> > > >
> > > > okay... so i'm trying to compile RTAI on my own and i'm having some
> > > > issues. i've downloaded and unpacked the kernel source for ts11-rt
> > > > and successfully (i think) cross-compiled it using the
> > > > gcc-3.3.4-glibc-2.3.2 crosstool chain from the TS ftp site and the
> > > > default ts7200 config file in linux24/arch/arm/def-configs. i did
> > > not
> > > > apply the adeos patch (assuming that because i downloaded the src
> > > for
> > > > the ts11-rt version it was not needed.
> > > >
> > > > next i unpacked the rtai-magma-3.2 source tarball from the TS ftp
> > > site
> > > > and tried to compile it using the same toolchain. i get message
> > > > stating "configure: error: HAL patch not applied enabled
> > > in ../linux24"
> > > >
> > > > what am i doing wrong?
> > > >
> > > > thanks,
> > > > dan
> > > >
> > > > --- In "Dan" <jiggersplat@> wrote:
> > > > >
> > > > > i can't seem to find rtai module binaries for ts11 (only ts9).
> > > are
> > > > > they out there somewhere and i just can't find them?
> > > > >
> > > > > i'm running the ts11-rt kernel and when i try and run anything
> > > from
> > > > > the test suite i get an error telling me the rtai modules are
> > > compiled
> > > > > for ts9 and i'm running ts11.
> > > > >
> > > > > i'm a total linux noob and am trying to avoid compiling them
> > > myself,
> > > > > but if that is in fact what i need to do, anyone have a good how-
> > > to?
> > > > >
> > > > > thanks,
> > > > > dan
> > > > >
> > > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|