On Thu, 16 Jul 2009, charliem_1216 wrote:
> --- In "ejeffredo" <> wrote:
>>
>> Hi all,
>>
>> I have bought two TS7200 without max197 option. I have a max197 and I
>> was thinking simply adding the component on the board to use it. Why can
>> I do for using the adc converter, send the board back to Technologic
>> Systems for reprogramming ?
This is an FAQ. You cannot add your own max197.
>
> Hi Manu --
>
> AFAIK, only the TS7250 has a socket for the MAX197, not the TS7200.
The 7200 can be purchased with a max197 option. Or at least it could when I
bought mine :-)
> In any case, the board has to be programmed at TS to recognize the MAX197
> chip, either before delivery or sent back at a later time.
>
> You will see a message from the bootrom if the MAX chip is found during
> startup.
>
> regards, ......... Charlie
>
>>
>> Thank
>>
>> Manu
>> Reunion Island
>>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|