--- In "ejeffredo" <> wrote:
>
> Hi all,
>
> I have bought two TS7200 without max197 option. I have a max197 and I was
> thinking simply adding the component on the board to use it.
> Why can I do for using the adc converter, send the board back to Technologic
> Systems for reprogramming ?
Hi Manu --
AFAIK, only the TS7250 has a socket for the MAX197, not the TS7200. In any
case, the board has to be programmed at TS to recognize the MAX197 chip, either
before delivery or sent back at a later time.
You will see a message from the bootrom if the MAX chip is found during startup.
regards, ......... Charlie
>
> Thank
>
> Manu
> Reunion Island
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|