On Tue, Jun 30, 2009 at 11:42 AM, akmartin73<> wrote:
> Doh! I didn't even think to look whether the ts modules were on the lenny
> image. I already bootstrapped a fresh lenny so I copied the modules,
> /etc/modules and /etc/X11 over from etch and installed xorg but it's still
> not working. I'll have to dig a bit deeper.
>
>
> Is QT/Embedded straightforward to set up? Seems to make a lot more sense than
> all the X baggage.
>
> Ted-Thanks for the tutorial. It really helped me get a better handle on how
> the ts boots. I've been considering trying to build OpenEmbedded instead of
> using debian. I've been looking at your github stuff and it seems logical
> enough. Was it troublesome to get working?
>
OE handles all the setup for most everything once you have it
configured. Most of the hard stuff should be done already in my
patches to OE. If I did it right, it should be much easier for you
than for me. ;-)
I've been wanting to push my changes to OE.dev for a while now for
both the ts7800 and ts7390. I just have not been able to find a free
weekend to get it done.
Ted
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|