Doh! I didn't even think to look whether the ts modules were on the lenny
image. I already bootstrapped a fresh lenny so I copied the modules,
/etc/modules and /etc/X11 over from etch and installed xorg but it's still not
working. I'll have to dig a bit deeper.
Is QT/Embedded straightforward to set up? Seems to make a lot more sense than
all the X baggage.
Ted-Thanks for the tutorial. It really helped me get a better handle on how the
ts boots. I've been considering trying to build OpenEmbedded instead of using
debian. I've been looking at your github stuff and it seems logical enough. Was
it troublesome to get working?
Thanks for all the help,
-Andy
--- In "bsmuck2000" <> wrote:
>
> Just did the lenny thing using the lenny filesystem from Technologics. X was
> not working and still is not, because I'm not interested in using X, rather
> QT/Embedded.
>
> The framebuffer was not working either. Needed to copy the ts7390fb.ko from
> the etch filesystem, then load all the modules having to do with the
> framebuffer like (see if I can remember) fbcons.ko, bitblit.ko,
> softcursor.ko, ts7370fb.ko ???.
>
> After doing that, the framebuffer worked fine.
>
> Just thought this might be helpful info.
>
> Brian
>
> --- In "akmartin73" <akmartin@> wrote:
> >
> > I'd like to upgrade my TS-TPC-7390 to Lenny/armel following the
> > instructions here http://ted.openavr.org/Lenny-on-ts7390/, but I was hoping
> > someone could tell me before I go down that road, will video still work
> > afterwards? I've tried the lenny filesystem from the ftp.embeddedarm.com
> > and couldn't run X--I'm wondering if a clean install will be any different?
> >
> > Thanks,
> > Andy
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|