Its definetly newbie question, but..
HW: TS-7800, SW: Debian Lenny, kernel 2.6.30-rc7, i'm trying to setup NFS-root.
As i understand watching at ts7800_defconfig from TS ftp archive, this is
options for network interface driver:
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796B=m
The problem consist in that: when i try to boot custom kernel, 2.6.30-rc7 from
this sources:
git://git.wormnet.eu/alex/ts78xx.git (i'm using: nand branch))
i see:
[ 27.270416] IP-Config: Device `eth0' not found.
and then of course:
[ 111.052642] Looking up port of RPC 100003/2 on 10.28.1.253
[ 141.049927] rpcbind: server 10.28.1.253 not responding, timed out
[ 141.056097] Root-NFS: Unable to get nfsd port number from server, using
default
[ 141.063457] Looking up port of RPC 100005/1 on 10.28.1.253
[ 171.059925] rpcbind: server 10.28.1.253 not responding, timed out
[ 171.066091] Root-NFS: Unable to get mountd port number from server, using
default
[ 201.069998] Root-NFS: Server returned error -5 while mounting
/home/kp/dev/lenny-arm
[ 201.077824] VFS: Unable to mount root fs via NFS, trying floppy.
[ 201.084874] VFS: Cannot open root device "nfs" or unknown-block(2,0)
[ 201.091289] Please append a correct "root=" boot option; here are the
available partitions:
[ 201.099699] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-lock(2,0)
When i'm building kernel, i included driver for ethernet chip (hard, not as
module). First time i enabled:
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796=y
After unsuccesfull try i check that in manual written "gigabit eth", but this
driver in "10/100Mb" subsection in kernel configuration, so i additionaly
enable this options:
CONFIG_MARVELL_PHY=y
CONFIG_NETDEV_1000=y
CONFIG_MV643XX_ETH=y
Result same. Question is what driver should be enabled to use network chip on
ts-7800?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|