ts-7000
[Top] [All Lists]

[ts-7000] redbooting other than 192.168.1.x

To:
Subject: [ts-7000] redbooting other than 192.168.1.x
From: "j.chitte" <>
Date: Wed, 17 Jun 2009 21:52:22 -0000
Hi,

I'm trying to rearrange the network due to a dhcp server causing me some 
potential conflicts. It is hogging 192.168.1.x and I don't have sufficient 
acces to be messing with it too much.

I want to get redboot to load from 192.168.2.x but while I see I can define the 
-h 192.168.2.3 it seems the netmask must either be assumed or compiled into 
redboot. 

I can't find any info which clarifies this but if I try that address it fails 
to find by kernel.

RedBoot> load -v -r -b 0x218000 -h 192.168.2.3 -m http /zImage-2.6.29
Unable to reach host 192.168.2.3 (192.168.2.3)

Apache2 is running at that address.

Is it possible to do that without rebuilding redboot?

Thx




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU