[ts-7000] adc_logger on 2.6 eabi

["j.chitte" <>]

Hi,

I have a mostly functional 7250 on 2.6.29 eabi build. I need to port my 
hardware interface that is based on Jim Jackson's adc_logger in the example 
files section.

For the moment it's segfaulting off the bat. 

I have not really got into debugging what's wrong yet but the obvious part to 
look at is the MMAP macro that creates a mapping to the IO ports on the board.

The other doubt I had was I have the max197 driver in the kernel. Is that going 
to lock acces to those ports and prevent adc_logger from mapping them.

Any general pointers that can avoid me wasting time would be appreciated.

TIA. 





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/