Hi,
As far as I know with TS PC/104 boards on TS-720
Only 3 IRQ are available:
- IRQ5 : IRQ_EP93XX_GPIO(19) (value=83) [GPIO_PORT_F_3]
Kernel 2.6.27+: gpio_to_irq(EP93XX_GPIO_LINE_F(3))
[|set_irq_type(irq, IRQ_TYPE_EDGE_RISING)|]
- IRQ6 : IRQ_EP93XX_EXT1 (value=33)
- IRQ7 : IRQ_EP93XX_EXT3 (value=40)
For example on TS-9600 (IDE PC/104), IRQ15 and IRQ14 are not possible.
Watch the schematics to check.
Regards,
Matt
ticrus00 wrote:
>
>
> I have a TS7200, and a DIO24 card. I'm finding Linux IRQ 33, and Linux
> IRQ 40 work for ISA_IRQ6 & ISA_IRQ7 (for bits 1 and 2 of port C on the
> DIO24).
>
> I get nothing for Linux IRQ 21 or Linux IRQ 22 when trying to trigger
> bit 0, the ISA_IRQ5. Also any idea what ISA_IRQ9 (bit 3) is?
>
> Thanks,
> Justin
>
> --- In <ts-7000%40yahoogroups.com>,
> "dawydiuk" <> wrote:
> >
> > > IRQ_GPIO2 (ISA_IRQ5) = Linux IRQ 21
> > > IRQ_EXT1 (ISA_IRQ6) = Linux IRQ 33
> > > IRQ_EXT3 (ISA_IRQ7) = Linux IRQ 40
> >
> > I found ISA_IRQ5 corresponds to Linux IRQ 22 not 21! There is typo
> > somewhere that I haven't tracked down yet...
> >
> > //Eddie
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|