[ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards

To:
Subject:	[ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200
From:	"ticrus00" <>
Date:	Tue, 02 Jun 2009 12:24:03 -0000

To:

Subject:

[ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200

From:

"ticrus00" <>

Date:

Tue, 02 Jun 2009 12:24:03 -0000

I have a TS7200, and a DIO24 card.  I'm finding Linux IRQ 33, and Linux IRQ 40 
work for ISA_IRQ6 & ISA_IRQ7 (for bits 1 and 2 of port C on the DIO24).

I get nothing for Linux IRQ 21 or Linux IRQ 22 when trying to trigger bit 0, 
the ISA_IRQ5.  Also any idea what ISA_IRQ9 (bit 3) is?

Thanks,
Justin

--- In  "dawydiuk" <> wrote:
>
> > IRQ_GPIO2 (ISA_IRQ5) = Linux IRQ 21 
> > IRQ_EXT1  (ISA_IRQ6) = Linux IRQ 33
> > IRQ_EXT3  (ISA_IRQ7) = Linux IRQ 40
> 
> I found ISA_IRQ5 corresponds to Linux IRQ 22 not 21! There is typo
> somewhere that I haven't tracked down yet...
> 
> //Eddie
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 <= Re: [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, Matthieu Crapet [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 Re: [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, Matthieu Crapet [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, charliem_1216 [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, ticrus00 [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, charliem_1216

<Prev in Thread]

Current Thread

[Next in Thread>

Previous by Date:	[ts-7000] Re: Powering down a Linux appliance - comments wanted, j.chitte
Next by Date:	[ts-7000] CONFIG_HZ change help needed, surajj1234
Previous by Thread:	[ts-7000] gnueabi : kernel sysvinit OK busybox only works static, j.chitte
Next by Thread:	Re: [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, Matthieu Crapet
Indexes:	[Date] [Thread] [Top] [All Lists]

Previous by Date:

[ts-7000] Re: Powering down a Linux appliance - comments wanted, j.chitte

Next by Date:

[ts-7000] CONFIG_HZ change help needed, surajj1234

Previous by Thread:

[ts-7000] gnueabi : kernel sysvinit OK busybox only works static, j.chitte

Next by Thread:

Re: [ts-7000] DIO24 Interupts TS7200 Re: SER4 Boards - Two (2) with the TS7200, Matthieu Crapet

Indexes:

[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU