I'm in the same boat with a 7260. I'm hoping to get the sub-two-second booting
thing worked out.
One thing I did find is that I could start my app before a lot of the
networking stuff was launched and that shaved 5 seconds off my boot time. I
just put a script before the other rc3 scripts.
--- In "tseredynski" <> wrote:
>
> Hello,
>
> So I have determined that the TS7250 w/ optional MAX197 ADC is capable of
> filling my SBC requirements, however I had been hoping to have a faster boot
> time. I was quoted on another post that it's ~30s to boot to the login
> prompt.
>
> I have not programed an SBC before, so I will be learning more about what
> kind of things I can do later, when it comes up, but at the moment I want to
> choose the best board I possibly can with what limited knowledge I have. So
> I was hoping to see what you guys might be able to tell me.
>
> 1. Is it possible to eliminate checks, or parts of the boot sequence to speed
> it up? My purpose for the SBC is to read in signals from 4 or 6 of the
> channels and write the data to a USB stick-type memory.
>
> 2. Can TS replace ADC's on other boards? Such as the TS7800 (which has a
> very good boot time, but does not advertise any optional ADC's).
>
> Thanks a lot for your help.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|